Foshan Qiancheng Packing Material Ltd
+86-757-85221909

Washi Tape

Home > News > Content

Tape Selection

There are many types of tapes, and there are many kinds of adhesives on the surface. Therefore, the performance and strength of tapes of various brands are different, so the following factors should be considered when purchasing tapes:


The microporosity of the adhesive to be adhered: due to the adhesive action of the adhesive tape, the moisture of the adhesive on the surface of the adhesive tape is quickly dried in the adhesive after the adhesive is applied to the adhesive tape, so that the adhesive tape becomes a part of the adhesive. Therefore, the microporosity of the surface of the desired adhesive is very important for the selection of the adhesive tape. If the microporous property of the adhesive is large, the moisture absorption force of the adhesive is large, and the adhesive tape is rapidly condensed, and the adhesive tape having a slower condensing speed is used. Or tape containing more adhesive.


Adhesive tape on the surface of the tape: The adhesive tape is applied to the bottom tape in the manufacturer. Usually, it is fully dried and then rolled into a roll. If the adhesive tape is too moist, the tape itself will be tightly bonded together, which is difficult to open when used. Some can't be used at all.


Previous: No Information

Next: And The Correct Use Of Paper Tape

Feedback
Contact Us
Address: Shitang road 16, Songxia Industrial Zone area A, Songgang, Nanhai, Guangdong, China
Tel: +86-757-85221909
Fax: +86-757-81632921
E-mail: info@packingtape.cn
Home | About Us | Washi Tape | News | Knowledge | Contact Us | Feedback | Mobile | XML